A twist on an old favourite

I've made another male birthday card and again this is a twist on my favourite design. I've created several male cards with the patterned paper you see on this card. All are slightly different from each other but have the same basic design.

Here's the recipe -

Materials:
Cardstock: Chocolate Chip, Whisper White, Printed acetate by My Memories, Rough and Tough: Awesome by Kaiser.
Ink: Chocolate Chip, Old Olive, Pear Pizzazz, Bashful Blue, Stazon Black.
Stamps: Trendy Trees by Stampin' Up, Sophie's Sentiments by Lawn Fawn, Roughin' It by Bo Bunny.
Other: Honeydew bakers twine by The Twinery, Martha Stewart circle cutter, sponge, mini glue dots, Fiskars corner punch, stamp-a-ma-jig.

Tips and Tricks:
1. After cutting the circle, I used the scrap card with the circle hole in it as a mask to sponge the grass under the trees. I used a Pear Pizzazz marker to add texture to the grass. I trimmed off the bottom of the circle so it hides nicely behind the twine.
2. I sponged around the circle with Bashful Blue ink to show some sky. I sponged heavier at the top than the sides.
3. Getting a clear, precise image on the acetate took a few tries but luckily I remembered a trick. If you make a mistake on acetate with Stazon, just use Stazon cleaner to wipe off the ink and try again. It worked and didn't damage my acetate.
4. The acetate is secured with mini glue dots.
5. I used a stamp-a-ma-jig for the trees and got their placement right the first time. I stamped the leaves first rather than the trunks as the leaves are the bulkiest part of the tree, therefore they need the correct spacing.

Stuff Ups:
1. Stamping on the acetate took me about 8 tries to get right.
2. I still haven't mastered that circle cutter so the circle is a bit rough around the edge.
3. The Bo Bunny stamps just don't hold Stampin' Up ink nicely. It tends to pool on the surface. Lawn Fawn stamps do hold the ink nicely.

Pleasant Surprises:
1. I like the way the acetate looks on the card, particularly because it is patterned so in some parts you can see through it to the patterned paper underneath and in other parts you can't because it's opaque.

2. The honeydew bakers twine matched the patterned paper perfectly. You may not be able to see the pale green in the paper but it's an awesome, coincidental match.

Paper piecing Christmas

I've decided to go with the Rustic colour scheme for my Christmas cards (I spoke about it in a previous post). Once I mocked up a Christmas card and did a whole heap of paper pieced baubles there was no going back! Here's a snap of some of the baubles. I made 110 of them.

They're a bit pale due to the camera flash but you get the idea. Some of the patterned paper was embossed with gold. I plan to stick rhinestones on the little circles running around the middle of the baubles once I finish the cards.

For my new nephew

This card took me hours to make, mainly because I couldn't think of a design that I liked. I kept playing with layouts, different colour schemes and papers. None felt right. Eventually I came up with this card. I've made it for my niece who gave birth to a gorgeous baby boy on Friday! I am posting this card and a present to her tomorrow.

My card also qualifies to be part of a sketch challenge from Lily Pad Cards, yay! Here's the link to the challenge - Sketch Challenge.

Here's the sketch:

This is also the first baby card I've ever made. I broke out some new Lawn Fawn stamps for the occasion.

Materials:
Cardstock: Bashful Blue, Brushed Silver, Whisper White, watercolour paper.
Ink: Bashful Blue, Versamark, Basic Black, Stazon Black.
Stamps: 'Plus One' and 'Quinn's ABCs' by Lawn Fawn.
Other: Big shot machine, Top Note die, silver embossing powder, aqua painter, white organza ribbon, sponge, Circle cutter by Martha Stewart, mini glue dots, clear Bitty buttons.

Tips and Tricks:
1. I cut a top note die cut with my big shot machine. I stamped the rattle in Bashful Blue to make my own background. The top note die cut was adhered to the Brushed Silver layer. I trimmed the end offs of the die cut.
2. The pram and Charlie's name are stamped with Versamark on water colour paper and embossed with silver embossing powder. I used an aqua painter to colour them in. The wheels on the pram are water coloured with Basic Black ink which has taken on a purplish hue once it was watered down. Bitty buttons are adhered to the pram wheels with mini glue dots.
3. Charlie's name is layered on a piece of Bashful Blue cardstock which is adhered to the top note die cut. This covers up the top of the die cut and gives Charlie's name some dimension without using foam dots.
4. I sponged around the watercolour paper for Charlie's name and the pram with Bashful Blue ink which hasn't shown up in the photo.
5. I placed a mini glue dot behind the knot of the bow to help keep it flat and secure.
6. Lining up the stamps in Charlie's name and the sentiment took some time and tweaking. I tested the position of the stamps with ink on scrap paper until I was happy with the alignment.
7. I tested Memento's Tuxedo Black and Black Stazon on the silver cardstock and found that Stazon gave a blacker, more opaque black than Memento so I went with Stazon.

Stuff Ups:
1. I stamped and embossed Charlie's name many times in my quest to find a style I liked. I used different inks and colours, tried cutting out the letters, coloured the letters with markers, it all took a long time.
2. Some of the rattles didn't stamp properly so I filled in any missing parts with a Bashful Blue marker.
3. I have trouble using Martha's circle cutter so it took me a few attempts to get usable circles.
4. Being a teacher, the lack of capitalisation on the 'congrats' stamp and for Charlie's name does irritate me but I didn't make the stamps so I'll have to live with it. If Lawn Fawn made a Quinn's capitals stamp set, I'd buy it in half a heart beat. Maybe I should suggest it, lol!

Pleasant Surprises:
1. The whole card - didn't think it would look this good (if I do say so myself). My cards are usually pretty average and never look as good as all the other blogs out there. The acid test was my husband's reaction. Rather than, "Oh that's nice honey, very good!" (which I love hearing) I got, "Wow! That's awesome!" He sounded so surprised! I'm so proud of this card!

Cricket Card

I've been needing ideas for manly cards and luckily I had this stamp set. This card was inspired by a card in an old Stampin Up catalogue and since cricket season is here again, I thought it would be the perfect time to make it.

The green cap features special Gel-a-tins Jelly scented embossing powder in 'Pine Fresh' so it smells like a pine forest. The fragrance is supposed to last for three weeks. You can check out Gel-a-tins here and their blog is here.

Materials:
Cardstock: Chocolate Chip, Old Olive, Cherry Cobbler, Very Vanilla.
Ink: Chocolate Chip, Cherry Cobbler, Versamark.
Stamps: Teeny Tiny Sentiments, Just Cricket.
Other: Modern label punch, Early Espresso striped grosgrain ribbon, dimensionals, mat pack, paper piercer.
Non Stampin' Up: Gel-a-tin's Jelly Scented embossing powder in Pine Fresh, Bo Bunny Cambridge icandy brads.

Tips and Tricks:
1. This card is really straight forward. As I said, the cap is embossed with green pine scented embossing powder.
2. The grass is cut with my paper snips.
3. The cricket ball is on a dimensional as is the sentiment.

Stuff Ups:
1. The brad placement. I even used my paper piercing guide and still didn't get it right.
2. The ribbon looks a little bit loose and wonky on the right hand side but it seemed fine in real life.
3. Maybe I should have lightly coloured the cricket bat.

Pleasant Surprises:
1. My layering proportions are getting much more accurate.
2. I'm pleased with the way the grass turned out.

In the works

I've got one card ready to post about (which will happen next weekend as I'm back to work tomorrow after the lovely school holidays) and some others in the pipeline.

I've been working on some prototypes for my Christmas cards and think I have my design finalised. I just have to decide on my colour scheme. It's a choice between the Clean scheme (white-silver-turquoise) or the Rustic scheme (Christmas colours featuring craft and gold). The Clean scheme is my favourite but is the much more expensive option. The Rustic scheme is nice (I've got some lovely papers for paper piecing) but I'm not too confident on the colours I've chosen until I've matched them together. Decisions, decisions..

Will post more after I've had more time to think about it. More on the weekend,

Kate :)

Motorcycle

I was checking out The Daily Marker today and Kathy recommended visiting Lily Pad Cards. I hopped across and loved it so I decided to enter their colour challenge. This is the first challenge I've entered so I'm excited! Here's the challenge link: Lily Pad Cards - Color Palette Challenge.

I made this card today and will be mailing it tomorrow to my brother-in-law for his birthday. Happy birthday Bob!

It's probably the first time I haven't included a sentiment on the front of a card. I just couldn't see where it would fit. This card is a Kate original, I haven't cased anything.
I also learnt (from Lily Pad Cards) the value of photographing my cards against a light, plain background rather than my dark, wooden hutch.

Materials:
Cardstock: Night of Navy, Cajun Craze, So Saffron.
Ink: Night of Navy, Cajun Craze, So Saffron, Versamark.
Stamps: Motorcycle, 'To a Classic'.
Other: striped grosgrain ribbon in Night of Navy, dimensionals, clear embossing powder, embossing buddy, heat tool, sponge, sticky strip.
Non Stampin' Up: corner rounder punch by Fiskars.

Tips and Tricks:
1. I used the emboss resist technique for the motorbike layer. I sponged over the clear embossed image with Cajun Craze and Night of Navy ink.
2. I used a sponge to ink around the cardstock layers with Night of Navy ink.
3. I used the speedometer stamp from 'To a Classic' as the background stamp on both the base card and So Saffron ribbon layer. The speedometer images on the So Saffron cardstock are clear embossed.
4. I pulled some threads from the ribbon to make it bunch up and stuck the bunched ribbon down on a piece of sticky strip. I secured the ends underneath the cardstock.

Stuff Ups:
1. It took me ages to get the ribbon layer the way I wanted it. I tried folding the ribbon in half lengthways and gluing it flat. I didn't like it. I tried bunching up the folded ribbon and gluing it down. I didn't like that either. Finally I tried the pulled thread method with a new piece of ribbon and was happy with that.
2. I had to fight the urge to bling up this card with brads and rhinestones. I thought it would be too much and didn't want it to look over the top. I hope I made the right decision there.

Another Male Birthday Card

It wasn't easy to photograph this card and catch all the details but I did my best! This was cased from an old catalogue like my last card but again I have tweaked it a fair amount. The layout of the card is what got my attention - the three strips of colour with a gap in between. I made this for my Father-in-law. It was his birthday last Friday.

Again, a couple of techniques that I wanted to try are on this card.

Materials:
Cardstock: Very Vanilla, Always Artichoke, Not Quite Navy, Cherry Cobbler.
Ink: Versamark Dazzle: Silver Frost (Non Stampin' Up but normal Versamark would be fine), Cherry Cobbler, Cherry Cobbler marker.
Stamps: French Foliage.
Other: Clear embossing powder.
Non Stampin' Up: Sophie's Sentiments stamp set by Lawn Fawn, Perfect Pearls Mist in Heirloom Gold, Fiskars corner rounder punch, Ranger Perfect Medium Pens, heat tool.

Tips and Tricks:
1. The first technique I tried was lining up my coloured card strips and stamping on them with Versamark. Then I adhered them to the base card with a gap in between.
2. The second technique I tried was stamping the sentiment in a pale colour repeatedly and then stamping it once in a bright colour. I used Versamark to do this and left a gap for the red sentiment. Then, for that red sentiment, I stamped it on the Versamark pad then onto my Cherry Cobbler ink pad before stamping on the card. I coated all the sentiments with clear embossing powder and heated them with my heat tool. You can just see the embossing in the photo.
3. The finished card was too clean for my liking so I spritzed it once with my Perfect Pearls mist. Once it had dried, I wiped over it with a tissue to clean any mist off of the embossed sentiments.

Stuff Ups:
1. The coloured card strips are not perfectly flush with the edges of the card. Some are a fraction shorter and that annoys me.
2. The sentiments are not perfectly aligned but it doesn't annoy me for some reason.
3. Maybe I should have used a different colour for the base (like Crumb Cake) so the sentiments stood out more. Then again I didn't want it to be reminiscent of the 'get well soon' card I made for my husband which features the same colours and stamp set.
4. I also don't like the flimsiness of Very Vanilla and Whisper White when it comes to base cards.
5. I am not convinced that Perfect Pearls mist was the right way to go with this card.
6. Also with the red sentiment, I didn't stamp it properly so I had to touch it up with a Ranger embossing pen and Cherry Cobbler marker.