Get Well Soon

This card was inspired by a card from an old Stampin' Up catalogue. I changed the colour scheme, stamps and ribbon, did some heat embossing and ended up with a result with which I am pleased.
I also broke out my new Lawn Fawn stamps and I am in love with them! They have a very different stickiness to them that I've never come across before with clear stamps - fun to poke and play with! The ink doesn't pool like on normal clear plastic stamps - it goes on smooth and crisp! Very pleased! You will be seeing more Lawn Fawn stamps here soon.

I made two of these: one as a thank you for my line manager and this for my Mother-in-law.

I watched a few ribbon tying videos on Youtube and I think I am on my way to ribbony happiness.

Materials:
Cardstock: Chocolate Chip, Blushing Bride textured and plain, Kiwi Kiss textured and plain, Very Vanilla, Crumb Cake.
Stamps: Cottage Garden.
Ink: Chocolate Chip, Blushing Bride, Kiwi Kiss, Versamark.
Other: Basic pearls, Mat pack, Paper piercer, mini glue dots, dimensionals, stamp-a-ma-jig.
Non Stampin' Up: Sophie's Sentiments stamp set by Lawn Fawn, organza ribbon, Fiskars corner rounder punch, clear embossing powder, heat tool.

Tips and Tricks:
1. I wasn't planning on using the stamp-a-ma-jig but I accidentally stamped the 2 step flower perfectly (lol) and liked it so much I dragged out the stamp-a-ma-jig and did the rest of the flowers properly. The first step I stamped in the coloured ink and the second step (the outlined flower stamp) I stamped in Versamark, coated with clear embossing powder and heat embossed.
2. A mini glue dot secures the ribbon under the bow.
3. Basic pearls finish off the flower centres including the tiniest pearls for the flowers near the sentiment.
4. The mat pack hole guide was used for the paper piercing.

Stuff Ups:
1. I admit I took ages trying to line up the 2 step flower stamps before giving up and using the stamp-a-ma-jig. I got the green and brown ones fine but the pink just wouldn't match up.
2. The ribbon looks a bit kinked so maybe I should have ironed it.
3. I should have used some tombow or a glue pen rather than my tape runner for the green strip because the strip was too narrow. A teeny bit of glue can be seen from the front. Probably is not noticeable but enough to annoy me.

Special 50th

This card was made for my Brother-in-law who celebrated his 50th birthday recently. It is similar to the card I made for my husband on his birthday but has been tweaked quite a bit. It looks much better in real life as it's difficult to photograph silver cardstock properly.

I really didn't want to give this one away, I became too attached to it!! You'll notice that I've been going nuts with my rounded corner punch lately!

Materials:
Cardstock: Brushed Silver, Very Vanilla, More Mustard.
Ink: Versamark, Chocolate Chip, More Mustard marker.
Stamps: Cheers To You.
Other: Silver embossing powder, heat tool, dimensionals, Hemp twine, Very Vanilla satin ribbon, Clear embossing powder,
Non Stampin' Up: Put On Your Party Hat stamp set by Fiskars (for the candle numbers), Kilometric gold and silver gel pens, paper by Kaiser craft, Ranger medium pen (embossing pens), Fiskars corner rounder punch (much better than my SU one), White Fizz glitter, heat and set powder.

Tips and Tricks:
1. I embossed the sentiment 'Cheers to you' in silver on the silver cardstock and I gotta say, it looked super cool!
2. I used my Ranger medium pen like a Versamarker and coloured in the beer foam with it. Then I applied heat and set powder, heated it with the heat tool, applied the White Fizz glitter and heated it again to set it.
3. The hemp twine wrapped around the Vanilla ribbon gives a more masculine touch I think.
4. The 50th candles were embossed in silver and coloured in with silver gel pen. The flames were coloured in with gold gel pen. These gel pens were nice and thick - gave good coverage but that means give the ink heaps of time to dry properly.

Stuff Ups:
1. Apart from having to stamp the beer mugs a few times to get crisp images, I did ok with this one, no major hassles!
2. Hang on, I forgot that I had to redo the 50th image because I smudged the wet silver gel ink.

Brief Update

Hope you've liked the new spate of cards I've created recently, this time of year is pretty card heavy for me - lots of birthdays and other celebrations. I have one new card ready to blog about and I'm making 2 new cards tonight so you can expect a few more posts later in the week or next weekend at the latest.

All of the cards that I have posted here have been purposeful. They've been made for someone for a reason. I think I'd like to make and blog about a few cards that are created just because I want to. I have some new stamp sets that I adore but don't really have a need for just yet. I don't want them to go to waste so I'm going to use them. School holidays are approaching so I'll have a bit of time then to create something.
Looking forward to it already!

Sew Nice to Stamp!

I've broken in another new stamp set - Sew Suite. This card was made for my Grandma, it's her birthday today and I'm visiting her tomorrow. I did want to make a bright, happy card and I think this fits the bill. It's a Kate original:

I've used quite a lot of things to create this card. It's one of the fussiest cards I've ever done.

Materials:

Cardstock: Melon Mambo, Yoyo Yellow (retired), Whisper White, Island Oasis DSP, watercolour paper.

Ink: Versamark, Stazon black, Pacific Point, Melon Mambo, Pumpkin Pie, Crumb Cake, Daffodil Delight, Sahara Sand marker.

Stamps: Sew Suite, Teeny Tiny Sentiments.

Other: Big Shot machine, Vintage Wallpaper embossing folder, heat tool, dimensionals, sponge, White Uniball gel pen, Ice Cream Parlor ribbon (American spelling), Ice Cream Parlor buttons, mini glue dots, aqua painter.

Non Stampin' Up: Clear embossing powder, non stick craft sheet.

Tips and Tricks:

1. For the sewing machine and cotton reels, I stamped them on the Versamark ink pad, then in Stazon Black, then onto the watercolour paper. I added clear embossing powder and heat embossed the images.

2. I used my Stampin spots to dab ink onto the craft sheet and used that ink for the water colouring.

3. The buttons are threaded with pieces of Whisper White cardstock and adhered with mini glue dots. The glue dots also keep the paper threads in place.

Stuff Ups:
1. The faux stitching around the outside. I practised on scrap cardstock first and it looked acceptable but when I started to do it on the card, it all got messed up. The cardstock was too light and my lighting was too bad to see what I was doing properly. I have learnt that it works best on darker cardstock (as it did in my practise session) and with smaller stitches. I need to learn how to 'corner' properly. I need to make the stitches consistently the same size and in a straight line. I feel I almost wrecked the card with the stitching I did at the end.
2. I used a Sahara Sand marker to trace around the sewing machine to cover up some leaked ink from my water colouring, but I wish I had just left it plain.
3. I forgot to position the buttons tag lower (I nearly forgot to use it completely!) which meant the sentiment didn't fit. As a result I had to cut it out from its nice modern label punched tag. I sponged around it and jammed it in the corner. I think it's ok but not what I had planned to do.
4. Maybe placing three buttons under the ribbon as well as on top would better balance out the card? I'm not sure. I don't want the buttons to dominate the whole card.
5. My cutting out could be better. At the very least, I could try a technique that I've seen on YouTube - after cutting out the images, run around the cut edge with the side of a black marker tip so you don't see the white core.
6. I think I can see a dimensional poking out from under a cotton reel.

I know I sound quite critical but I really am pleased with this card, apart from the faux stitching that is.

A Venture in Layering

I've been wanted to try a few new techniques lately and I'm always looking for the opportunity to use them. For this card I wanted to try a bit of layering. Not sure what the official term is, but I'm using layering to describe the building of ink, stamps and/or embossing on cardstock. This first attempt turned out to be a bit light handed but I'm happy with what I have done none the less.

I did break out my brand new and desperate to try product - scented embossing powder! I bought it (and many others) from gel-a-tins. It smells just like a vanilla latte. Apparently the scent will last for 3 weeks. The colour is white with brown specks. You can't really see it in the photo, I probably should have used a darker embossing powder (such as Chocolate Bliss or Can't Catch Me Gingerbread).

Grandad's birthday - hope he enjoyed it and liked my card. Here's the recipe:

Materials:
Cardstock: Chocolate Chip, Very Vanilla, Newsprint DSP.
Ink: Chocolate Chip, Versamark.
Stamps: Bliss, Teeny Tiny Sentiments, Wonderful Favourite.
Other: Early Espresso striped grosgrain ribbon, oval punch, scallop oval punch, dimensionals.
Non Stampin' Up: Perfect Pearls mist in Heirloom Gold, Gelly powder - Extra Foam Vanilla Latte scented embossing powder from gel-a-tins. (The website is a little bit buggy at the moment but I'm sure it will be fixed soon.)

Tips and Tricks:
1. The layering - I've seen a lot of cards out there with a lot going on with the DSP - inking, embossing, distressing, etc, so I had a go at it myself:

• First I misted my DSP with water and then crinkled and screwed it up.
• Next I sprayed it with Perfect Pearls mist in Heirloom Gold and let it dry.
• Then I stamped an image from the Bliss stamp set in Versamark and applied the scented embossing powder. I heat embossed it.
• After that I stamped the bird from Bliss in Chocolate Chip ink randomly over the DSP.

2.  I stamped another bird in Chocolate Chip on Very Vanilla cardstock, cut it out and popped it up on dimensionals in the bottom right hand corner.

Stuff Ups:
1. As I've said already, I should have chosen a darker embossing powder - I was too cautious.
2. Same with the Perfect Pearls mist - I should have used more.
3. The sentiments aren't aligned properly. They are three separate stamps and you can tell. The happy birthday one is also too high and nearly cut off by the punch.

Clean and Simple Birthday

I wanted to make a clean and simple birthday card for my friend Nean so I set myself a 20 minute challenge! This is the result:

The green does look much better in real life (like most cards do) and is textured which hasn't been picked up too well by the camera. That's probably my fault, not the camera's.

Materials:
Cardstock: Crumb Cake, Kiwi Kiss textured, Island Oasis DSP, Tempting Turquoise, Very Vanilla.
Ink: Tempting Turquoise.
Stamps: Teeny Tiny Sentiments.
Other: Big Shot machine, Top Note die, Victorian lace, Beautiful Wings embosslit, Basic Pearls, Modern label punch, dimensionals, mini glue dots.
Non Stampin' Up: None.

Tips and Tricks:
1. There are none really, this card is as easy as they get. I suppose I'll tell you that I cut up the Basic Pearl Strips into segments of two or three pearls and used them as the butterflies bodies.
2. The butterflies are stuck on with mini glue dots.

Stuff Ups:
1. This card could certainly be jazzed up with a bit of time and effort but I'm pleased with it as is.
2. Probably should have used Old Olive instead of Kiwi Kiss but I really wanted to use textured cardstock and I don't have textured Old Olive.

Father's Day 2 Ways: Part 2

For this card I knew I wanted to play with two of my new Stampin' Up items - Elegant Soiree DSP and the 'To a Classic' stamp set. They may be retired now (since the new catalogue came out) but I still only just bought them. This card is a Kate original and here is the result:

There's a lot of colours mixed up here so I hope I've gotten away with it. I really wish I had the correct coloured cardstock but I didn't so I had to substitute for some retired cardstock.

Materials:
Cardstock: Elegant Soiree DSP, Chocolate Chip, Very Vanilla, Bashful Blue or Brocade Blue (sorry don't know which!)
Ink: Chocolate Chip ink pad, Chocolate Chip marker, Marina Mist marker.
Stamps: To a Classic, Teeny Tiny Sentiments.
Other: Early Espresso striped grosgrain ribbon (think it's retired now), scallop oval punch, oval punch, dimensionals, paper piercer, mat pack.
Non Stampin' Up: Brown/bronze brads, aqua painter.

Tips and Tricks:
1. The car and checkered pattern are the same stamp and in between them (on the stamp) is the sentiment 'happy birthday to a classic' (I think) which, of course, I didn't want on a Father's day card. I used markers to ink up the stamp.
2. I used Marina Mist ink and an aqua painter to lightly shade in the car.
3. I tried to make a 'dashboard dial' effect with the sentiment layers.
4. The car layer is popped up on dimensionals to accomodate the brads and ribbon underneath.

Stuff Ups:
1. The car image - I should have either clear embossed the image first or used watercolour paper because the ink started to bleed when I added the water via the aqua painter. After it dried I touched up the image with the marker which hid a multitude of sins!
2. I've run out of Baja Breeze cardstock - I had to substitute with old retired stuff instead.
3. I've run out of Early Espresso cardstock - I had to substitute it with Chocolate Chip instead.
3. Probably should have used four brads to balance out that top layer.
4. The ribbon should have been a bit tighter but wrapping it around paper was difficult due to its flimsiness.

Pleasant Surprises - Ooh, a new heading!
1. I managed to align the 'Happy Father's day' and 'dad' stamped images the first time I stamped them!

Father's Day 2 ways: Part 1

Yes, it's been a while! Had a card drought for the last month - no birthdays or anything. I have two for you today - one I made for my Dad and one I made for my father-in-law. I'll start with the one for my Dad.

You can just see a pic of me on the left behind the card - hello me!
I was cruising google images for inspiration and came across a card I adored and have cased it almost entirely I'm sorry to say. It features three Stampin' Up products that I received yesterday (To a Classic stamp set, Newsprint DSP and silver brushed metallic cardstock, oh and the motorcycle stamp that I haven't used yet) so I had to try it. The original card I loved was made by Ros Davidson.

Materials:
Cardstock: Basic Black, Brushed Silver, Very Vanilla, Newsprint DSP.
Ink: Stazon Black, Basic Black.
Stamps: Motorcycle, To a Classic, Teeny Tiny Sentiments.
Other: Sponge, dimensionals, big shot machine.
Non Stampin' Up: Diamond Plate embossing folder by Universal, Black and white checkered Japanese washi tape (inside the card), Stampamajig.

Tips and Tricks:
1. Using the brushed silver cardstock was a lot easier than using a coke can to achieve the metallic effect. Another idea is to wrap a piece of cardstock with tin foil and run that through the big shot machine. The cardstock should give the tin foil the power to hold the embossed image. Haven't tried it myself just yet, only read about it somewhere.
2. I used the stampamajig to stamp the sentiments. I find that the easiest way to stamp with small skinny stamps. I don't bother using the plastic sheet, just that little T-square device. It helps to avoid wobble marks and smudging you make especially if you are prone to it like I am.
3. I sponged around the main image with a watered down Basic Black ink solution. My Basic Black ink spot pad has dried out and I don't have a reinker so I just added a bit of water (and probably wrecked it now) and used that with a sponge.
4. Ways my card differs from the original:

• I am not talented enough to create a masked and stamped image so mine is a single stamped motorbike.
• My proportions and dimensions are different (and probably skewiff).
• I have a sentiment stamped on mine.
• I used a diamond plate embossing folder rather than the square lattice embossing folder.
• So yeah, not a whole heap different...

Stuff Ups: 
1. The Very Vanilla layer - I should have trimmed it down but I was too worried that I'd ruin it so I left it big.
2. Getting that Very Vanilla layer on straight. I must have peeled it off 3 or 4 times. Thank goodness the card didn't bend.
3. Forgot to take a photo of the insert inside. It looks really cool with the black and white checkered washi tape along the bottom - like a checkered flag at the races.